Put the curve back into bent pad arms in one squeeze. The top jaw is concave and the opposing jaw is tapered to fit inside.
Pressing the pad arm between the pre-formed jaws quickly creates the proper pad arm curve

It is used to give the soft bend to the hinge and connecting wire between the hinge and eyewear glasses or chassis .It also works very well on the Silhouette frames, metal eyewear glasses frames and acetate eyewear glasses frames .The nylon jaw and soft rubb...

It is used to give the soft bend to the hinge and connecting wire between
the hinge and eyewear glasses or chassis .It also works very well on the
Silhouette frames, metal eyewear glasses frames and acetate eyewear glasses
frames .The nylon jaw and soft rubber pads protect the color of the hinge, temple
and connecting wire between hinge and glasses

One of the best optical pliers to adjust and fine-tune the nose pad arm cup

Cutting the excess length from rimless compression tubing is easy and safe with
the 5mm wide head. Rounded jaws prevent scratching the lens. Not recommended
for use on metals.

Easily and safely extract the post and tubing from a compression rimless lens.
This simply to use tool combines tremendous pressure delicately and effortlessly applied to gently push out the post and tubing from the holes. Will not mar frames.
Pins pivot easily to accommodate horizontal and vertical mounting systems

10 mm holding pliers. Concave and convex hole 10mm nylon pads

Securely braces rimless eyewear while making end piece adjustments
Use with temple and end piece adjusting pliers

For use on three-piece rimless bushings exclusively. The cutting end is highly polished to eliminate the risk of damage to lenses; therefore using this on other materials is not recommended.

Forms the curvature of metal eye wires into conformance with the curvature of a lens
Non-Marking, replaceable nylon jaws

Has the clearance needed for measuring around just about any lens blank or frame.
Stainless Steel and Brass.

For removal of push-push in type nose pads